Acer Liqu > September 8, 2017 By Afzaal Ahmad Leave a Comment.Acer Liquid Z120 MT6575 DUO Firmware Flash File/Stock ROM Acer Liquid Z120. Initial Steps to Install Firmware on Acer Liquid Z120. Download And Install SP Flash Tool. How To Flash Acer Liquid Z120. First, you need to download and install SP flash tool and firmware for your Acer Liquid Z120 Download and install MTK Android USB drivers Then download Firmware file/Flash file/ROM for your phone Your phone must have 50 % charging before this process, switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket Now open SP flash tool.exe When SP flash tool open, go to download button in SP flash tool In download tab, click on scatter load button After locating the scatter tab, click on the download button Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable) Now flashing is completed, a green ring will appear in SP flash tool Close SP flash tool on your computer and unplug a phone Power on the phone and enjoy After flashing process starts, it might take up to 5-10 minutes. So, keep patience and wait. Might Also Like. Acer Liquid Z410 Telcel Android 4.4.2 Firmware Flash File. |
